Signal Processing Systems : IP Video Distribution : AMX - NMX-DEC-N2222

JPEG 2000 Digital Cinema Grade Video over IP Decoder, PoE, HDMI

Model: NMX-DEC-N2222

Input and Output Scaling – Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
Plug-n-Play – Auto-detect technology reduces installation and programming time
Power Over Ethernet (POE) – PoE eliminates the need for power supply
Infrared (IR) – Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices Unlimited Scalability

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW
The AMX SVSI N2000 Series utilizes JPEG2000 compression for HD, cinema-grade video distribution on the LAN for applications when video quality is top priority. The NMX-DEC-N2222 Decoder is used to decode streams back to DVI or HDMI format for display on any monitor. Pair with the NMX-ENC-N2122 to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.
The NMX-DEC-N2222 includes Local Play, allowing users to upload and save 8 playlists that can contain up to 64 jpeg or PNG files. When a video stream is lost, the stored images will play, preventing blank displays.
Includes IR, serial, balanced audio, and two network ports (one POE). Digital video output only.

Input and Output Scaling – Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
Plug-n-Play – Auto-detect technology reduces installation and programming time
Power Over Ethernet (POE) – PoE eliminates the need for power supply
Infrared (IR) – Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices Unlimited Scalability
Two RJ45 Ports – Decoder features two RJ45 network ports (one PoE)
Stand Alone or Card – Available as a standalone device, or card for use with NMX-ACC-N9206
COMMON APPLICATION
- The NMX-DEC-N2222 is the perfect solution for matrix switching and distribution of HD, cinema-grade quality video over LAN. Common applications include enterprise, house of worship, entertainment, and stadiums.

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Digital to Analog Decoder/Encoder
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 5 in
Height: 1.05 in
Width: 7.89 in
Product Weight: 1.47 lbs
Regulatory Compliance: HDCP
Video:
•Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port
•Video Output: HDMI, DVI-D (through adapter)
•Formats: HDMI, DVI-D (through adapter), HDCP content protection support
Audio:
•Input Signal Types: Network video over Ethernet via RJ45
•Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
•HDMI Audio Formats: 8ch PCM
•Analog Audio Format: Stereo 2-channel
•Digital-to-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder settings)
Latency:
•50 ms for 720p60
•140ms for 1080p60
COMMUNICATIONS:
•Ethernet
•PO
•10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
•P1
•10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
CONTROLS AND INDICATORS – REAR PANEL:
•PWR LED: Same as POWER LED described above
•HDMI LED: On (green) when there is a connection to a valid video source
•STAT LED: Same as STATUS LED described above
•STRM LED: On (green) when the unit is streaming video
Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: Up to ~44 BTU/hr
General:
•Mounting Options:
•Stand alone, surface mount, wall mount, or rack mount
•Surface and wall mounting requires (not included):
• NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
•Rack mounting requires one of the following (not included):
• NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
•NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
•Recommended Accessories:
•NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders, Decoders and Audio Transceiver
•NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
•NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
•NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units

Decoder 729 kb - Data Sheet

Project List

Suggested Products

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 2-HDMI In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., Black

by Aurora Multimedia Corp.

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 2-HDMI In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., White

by Aurora Multimedia Corp.

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 1-HDMI In. 1-VGA In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., White

by Aurora Multimedia Corp.