Ceiling, Floor, Table & Wall Boxes : Related Box Products : Liberty AV Solutions - USB-WP-H-A

Full-Speed USB Extender Wall Plate, Almond

Series: Intelix

Model: USB-WP-H-A

USB 2.0 full speed 12Mbps, USB 1.1 legacy support
Up to 330 feet cable lengths on U/UTP category 5/5e/6
Not for USB 2.0 high speed
No external power required, uses host device's 5V power
USB "B" female (host) to RJ45 jack connectivity

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The intelix USB-WP-H-A decora insert allow installation in any setting, facilitating a clean low profile installation. It is plug and play does not require driver software and uses the same USB circuit as other USB bus power devices for installation flexibility.

USB 2.0 full speed 12Mbps, USB 1.1 legacy support
Up to 330 feet cable lengths on U/UTP category 5/5e/6
Not for USB 2.0 high speed
No external power required, uses host device's 5V power
USB "B" female (host) to RJ45 jack connectivity
Almond Decora insert with matching surround
Applications:
Uses any Cat5/5e/6/6A twisted pair cabling
Extension of USB 1.1 and 2.0 full speed signals
Plenum routing of USB 1.1 and 2.0 full speed
Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Shipping Weight: 0.20 kg (0.45 lbs)
Shipping Weight: 0.45 lbs
Warranty (Length/Type): 2 years
Construction: ABS Plastic
ROHS Compliant: Yes
Active Power: 2.50 Watt
DC Voltage: 5 Volts
Regulatory Compliance: CE, ROHS
USB: One (1) Male USB Type A
Twisted Pair: One (1) 8P8C port (Shielded RJ45)
Full Speed (12 mbps) Maximum Distance via Cat 5e: 100 ft
Low Speed (1.5 mbps) Maximum Distance via Cat 5e: 300 ft
Operating Temperature (Environment): 0 to +40 °C
Operating Humidity (Environment): 20 to 90 % Non-condensing
Storage Temperature (Environment): -10 to +60 °C
Power: Via USB output of host device
High Power Device Extension (<500 mA draw): 30 ft
Low Power Device Extension (<100 mA draw): 200 ft
Self Powered Device Extension (0 mA draw): 330 ft
ESD Protection: Contact Discharge: 2 kV
Air Discharge: 4 kV
IEC61000-4-2 1995

130419-USB-WP-H_Tech_Specs.pdf 395 kb - Data Sheet

Project List

130322-USB-WP-H_Install_Guide.pdf 364 kb - Instructions

Project List